How to automatically turn on the mining rig after a power outage?

How to automatically turn on the mining rig after a power outage?

In this guide, we will show you how to set up BIOS motherboardto rig automatically started after a power outage. 

If you are using the hosting service of the rig, or if you may not be able to physically turn on the rig after a power outage, it is recommended BIOS setting to automatically turn on the rig when the power reappears. Note that this will only happen if the rig shuts down due to a power outage. If you turn off the rig through the Windows shutdown function, this method will not work.

Please note that the location and name of each setting may differ depending on your motherboard manufacturer and BIOS version. We will try to cover most of the manufacturers.

Asus motherboards

  1. Reboot your rig and enter BIOS with multiple presses OF or F2 while loading the rig
  2. If you are in EZ Modeclick F7 to open Advanced Mode
  3. Transfer to tab Advanced> APM Configuration
  4. Specify Power On for Restore AC Power Loss
  5. Click the tab Exit
  6. Выберите Save Changes & Reset.
How to automatically turn on the mining rig after a power outage?

Gigabyte motherboards

  1. Reboot your rig and enter BIOS with multiple presses OF or F2 while loading the rig
  2. If you are in Easy Mode, click F2 to open Advanced Mode
  3. Click the tab Settings> Platform Power
  4. Specify Always On for AC BACK
  5. Go to the tab Save & Exit
  6. Выберите Save & Exit Setup.
How to automatically turn on the mining rig after a power outage?

MSI motherboards

  1. Reboot your rig and enter BIOS with multiple presses OF or F2 while loading the rig
  2. If you are in EZ Mode, click F7 to open Advanced Mode
  3. Go to the menu Settings> Advanced> Power Management Setup
  4. Specify Power On for Restore after AC Power Loss
  5. Go to the menu Settings> Advanced> Save & Exit
  6. Выберите Save Changes and Reboot
How to automatically turn on the mining rig after a power outage?

ASRock motherboards

  1. Reboot your rig and enter BIOS with multiple presses OF or F2 while loading the rig
  2. Click the tab Advanced> Onboard Device Configuration
  3. Specify Always On for Restore on AC / Power Loss
  4. Click the tab Exit
  5. Выберите Save Changes and Exit
How to automatically turn on the mining rig after a power outage?