Nanominer v3.5.2: Download and configure - Quick start [2021]

Nanominer v3.5.2: Download and configure - Quick start [2021]

Nanominer is a fast and stable, convenient and reliable miner released by Nanopool - one of the best solutions for cryptocurrency mining.

Nanominer is a software product developed by nanopool for creating structural cryptocurrency units based on the Ethash, Etchash, KawPow, Octopus, Ubqhash, Cuckaroo30, RandomX and Verushash algorithms. current version nanominer was created to work with every cryptocurrency based on these algorithms, including Ethereum, Ravencoin, Ethereum Classic, Conflux, QuarkChain, Ubiq, Monero, Cortex, VerusCoin and many more. This version nanominer runs on Windows or Linux with AMD or Nvidia graphics cards (except for the Random X and Verushash algorithms, which are only supported on the processor). The Cuckaroo30 algorithm is only supported on AMD Radeon RX 570 16GB GPU. Octopus is currently only supported on Nvidia GPUs.

Download Nanominer v3.5.2

Nanominer can be downloaded from the link below.

Change log

naominer v3.5.2

Fixed issue: Could not create binaries for gfx103x (AMD RX 6xxx series GPUs) on 2020 drivers (20.40 and similar for Linux; 20.11.2 and similar for Windows).

naominer v3.5.1

  • Fixed crashes and reboots on Nvidia 10xx and 20xx series.

naominer v3.5.0

  • Automatic LHR detection by default;
  • Configuration parameter lhrto manually select the unlock percentage.

Example. Set the LHR unlock percentage on device 0 to 71,5%, disable LHR unlock on device 1 and autoselect on device 2:

lhr = 71,5, -1,0
  • Fixed display of GPU temperature, power consumption and fan speed for several Nvidia drivers.

naominer v3.4.6

Bugfix: VerusCoin (VerusHash) mining was fixed in CUDA version 11.

naominer v3.4.5

  • Significantly improved FIRO (Firopow) zombie mode on AMD 4GB GPUs;
  • Fixed mining VerusCoin (VerusHash).

naominer v3.4.4

  • Improved performance of RandomX (Monero).

naominer v3.4.3

  • Improved performance of KawPow (Raven) and FiroPow (FIRO) on Nvidia GPUs (up to 3% depending on GPU model).

naominer v3.4.2

  • Significantly improved Ergo (Autolykos2) performance (up to 60%) in the AMD Vega family (RX Vega 56, RX Vega 64, Radeon VII);
  • Slightly improved Ergo (Autolykos2) performance in AMD polaris (RX 5xx) family.

naominer v3.4.1

  • Firopow zombie mode for AMD GPUs (Zombie mode for Nvidia GPUs was implemented in version 3.4.0).

naominer v3.4.0

  • Added a firepower algorithm for the upcoming FIRO hard fork.
  • Zombie mode supported for Nvidia GPUs.

naominer v3.3.14

  • Upgrade to meet Nicehash requirements. If you are not using Nicehash, you can ignore it.

naominer v3.3.13

  • Significantly improved Ergo (autolykos2) performance (~ 10%) on Nvidia Turing GPUs (RTX 16xx, RTX 20xx, CMP 30HX)
  • Reduced Ergo (autolykos2) power consumption on Nvidia GPUs.

naominer v3.3.12

  • Added Verthash for AMD GPUs;
  • Fixed Raven bug on Nvidia with Linux driver 470.57 (default driver for SMOS);
  • Warn user if GPU scheduling hardware acceleration is not enabled;
  • Decreased obsolete shares on Raven;
  • Fixed crash when launching nanominer with some AMD GCN3 and elder GPUs;

naominer v3.3.11

  • Fixed invalid issue of ETH shares on some Nvidia RTX30xx.

naominer v3.3.10

  • Fixed bug with invalid Raven promotions for some Nvidia RTX 30xx GPUs;
  • Fixed issue with tuning ETH performance for some Nvidia RTX 30xx GPUs.
  • Launch with command line arguments returned. The config files are still working.

naominer v3.3.9

  • Raven (Kawpow) performance improvement for Nvidia Pascal, Turing and Ampere GPUs (about + 1,5%);
  • Ergo (Autolykos2) performance improvement for Nvidia Pascal (1% - 3%);
  • Improved connection stability for Chinese users;
  • Set the fan speed parameter;

naominer v3.3.8

  • Fixed kavpou for some users under HiveOS;
  • Fixed incorrect shares for some XMR jobs due to incorrect BIN length

nanominer v3.3.7

  • Fixed problems with auto-update;
  • Improved network stability.

nanominer v3.3.5

  • Fixed "Unknown GPU name" issue with new AMD drivers.

nanominer v3.3.4

  • Faster data set creation for Ergo on AMD RX 4xx and 5xx series (autolykos2 algorithm).

nanominer v3.3.3

  • Faster data set creation for Ergo (autolykos2 algorithm);
  • Added zombie mode for Ergo on 2GB Nvidia and AMD GPUs;
  • Fixed issues with Shardpool (Zilliqa).

nanominer v3.3.2

  • Increase Autolykos performance by about 40% for AMD Vega family (RX Vega 56, RX Vega 64, Radeon VII).

nanominer v3.3.1

  • Added dual Raven + Zilliqa;
    Example config.inifor double Raven with Zilliqa:
coin = RVN
wallet = RRL5mMNeox75MGbqnfUZEhn3RferuvFGcy

wallet = zil1rpxnv479xy9c2jlgry3wy3869rnt4rjvjwjtuv
zilEpoch = 0 ; number of DAG epoch for caching
pool1 =
  • Fixed issue with pool 2Miners.

Example of Nanominer settings (bat-file)

The miner is launched using the command line in the Linux operating system or a bat file in Windows. Below are examples of bat files for each of the cryptocurrencies that can be mined with Nanominer. Remember to replace YOUR_ADDRESS with your wallet address and RIG_ID with your farm name. You can choose the name yourself absolutely arbitrarily, it must contain only letters of the English alphabet and the signs "-" and "_". The wallet must be specified for the cryptocurrency you are mining.

Nanominer additional parameters

Запуск программы для майнинга иногда требует дополнительных настроек, например, вам нужно отключить одну из карт или установить лимит рабочей температуры карты. Ниже мы подготовили для вас список из наиболее популярных настроек майнера Nanominer. Чтобы применить настройку, добавьте ее к стандартной строке запуска, указанной выше. Обычно параметры майнера не могут изменить разгон видеокарты. Подробная инструкция по разгону видеокарт представлена в этой статье.

Nanominer is launched using a special configuration file (config.ini). First, run the bat file as shown in the example above. This will create a configuration file. Further, all additional parameters for starting the program are written one on each line in this configuration file (config.ini).

Nanominer automatically detects whether you are trying to connect to the pool via SSL protocol or not. For an SSL connection, no additional parameters need to be specified. Please note that the address of the pool with SSL is usually different from the address of the pool without SSL. Example - 2Miners Ethereum pool for SSL connection, - 2Miners Ethereum pool without SSL.

devices= allows you to use only the necessary video cards for mining. After devices =, specify the indices of the video cards that you want to use, separated by commas, while the first video card has an index of 0. For example, if you have a rig of 6 video cards, the indices of the video cards go from 0 to 5. Adding a parameter devices=0,1,2,3,5 will start mining on all video cards except the fifth one (with index 4).

noLog disables the creation of a log file. By default, a log file is created and written to the directory where the program is located.

countDevShares=false allows you to disable the display of statistics for those balls in the miner's statistics that were found at the time of mining to the developer's wallet. By default, the statistics of these shares are included in the general statistics of the miner.

Nanominer allows you to configure the overclocking parameters of the video card in the miner launch line. Overclocking settings can be applied to all video cards together, to do this, specify only one value, for example coreClocks=+100 or to each of the video cards separately, to do this, specify the values ​​separated by commas coreClocks=+100,-100,+150

powerLimits= sets the maximum power consumption of the video card (power limit) as a percentage from -50 to 50. For example powerLimits=-10 sets the maximum power consumption to 90%, and powerLimits=+20 specifies 120%.

coreClocks= adjusts the core clock in MHz for Nvidia video cards. Use relative values ​​like -200, +300, etc. like coreClocks=+100 or absolute values ​​like coreClocks=1000

memClocks= adjusts the video memory clock (memory clock) in MHz for Nvidia video cards. Use relative values ​​like -200, +300, etc. like memClocks=+100 or absolute values ​​like memClocks=4000

Benefits and Testimonials

Positive aspects of working with nanopool eth / etc:

  • High pool hashrate.
  • Customizable payout system.
  • Good technical support.
  • Lack of registration.
  • Availability of a mobile application for monitoring production.

And, of course, the reliability of the service, which has been operating in the market for two years and has earned many positive reviews.

A relative disadvantage is the lack of a Russian-language interface, but this can be easily solved with the help of a browser translator, and there is nothing to do in mining without a minimum knowledge of English.